Thread Height Gauges for All External and for Internal Threads 1 1/2″ in Sizes 3 1/2″ and Larger

To purchase – please contact Allen Gauge directly: 412-241-6410

Internal and External Large and Small Diameter

Allen thread height gauges give a fast, accurate reading of distance between the thread crest and thread root. Gauges with dials reading 0-100 measure the actual thread heights. Those with dials reading 1-10-0 measure the error in thread height and must be used with a setting standard.

The 6709, 6710 and 7705 gauges are equipped with the Allen Self-Centering Height Gauge Point for round bottomed threads. This point is a unique combination of an outer sleeve, hardened and ground to a 60° angle, which seats on the thread flank and allows the inner contact point to drop into the exact center of the root radius. The new 6710 and 6711 gauges feature a shortened anvil, allowing for easier inspection of small diameter tubular products. This design permits anvil contact surface to rest on all fully formed threads, instead of overlapping imperfect threads.

Other height gauges have cone points for V or buttress threads or special points for extreme-line threads. All gauges are furnished with fitted carrying cases.

 

Thread Height Gauges for All External and for Internal Threads 1 1/2" in Sizes 3 1/2" and Larger

TOOL NO.DIAL TYPEANVIL POSITIONTHREAD FORM
52260-50ParallelV
5226-A0-10-0ParallelV
58860-50Rt AngleV
5886-A0-10-0Rt AngleV
5886-B160-10-0Rt AngleButt Csg. 10 to 20°
5886-C0-10-0Rt AngleButt Csg. 4 1/2 to 13 3/8"
6709-L0-50Rt AngleROUND
6709-M0-10-0Rt AngleROUND
67100-50Rt Angle ShortROUND
67110-10-0Rt Angle ShortROUND

Address

421 N Braddock Ave
Pittsburgh, PA 15208

Hours

Mon - Fri 7am - 4pm
Sat - Sun Closed

Contact Us

Phone 412-241-6410

Fax 724-539-2540

info@allengauge.com